Your shopping cart
Your shopping cart is empty!
Flowmaster's New Delta Force universal-fit replacement dry synthetic air filter features 0.50 inch deep pleats by 8.63 inch cone length providing an overall wide surface area for optimum airflow. The inlet has a large 6.00 inch opening and the end cap has the Flowmaster logo embossed right into the end showing everyone you appreciate quality and performance. A dry filter is recommended if you driv..
This New Delta Force Air Filter is a Universal-fit High Flow Cone-shaped Performance Air Filter that is a cleanable/reusable 8 layer cotton gauze design capturing more dust and dirt particles than typical 6 layer filters. Features include 0.50 inch deep pleats by 6.87 inch length providing an overall wide surface area for optimum airflow. The inlet opening measures 2.84 inches and the end cap has ..
The Delta Force "U-fit" air intake kit is perfect for the person doing an engine transplant in a "classic car" or race vehicle and needs a solution for fabricating a custom air intake. This universal system comes complete with a custom molded Cross-Linked Polyethylene (XLPE) high-flow 4.00" intake tube with numerous pre-set cut guides and various bend angles for versatility and adaptation under th..
The 5-3/4" long stud fits air Filters up to 5" tall. The 1/4"-20 stud fits most carburetors. Dominator carburetors use the adapter since they have a 5/16"-18 tapped hole in the carburetor.Features:Zinc Plated Steel Stud, Adapter & Wing NutWill Fit Most Domestic Carburetors (Chrysler, Ford, and GM)Allows Use Of A 5.0" Inch Tall Air Filter ElementStud Can Be Cut to Fit Shorter Air Filters (where n..
MSD now offers the perfect addition to your MSD Atomic EFI or other aftermarket electronic fuel injection, the 6EFI Ignition Control. The 6EFI is designed to work in harmony with electronic fuel injection systems and comes with detailed wiring instructions making installation a breeze. Increased throttle response, smoother idle, quicker starts and full ignition power throughout the entire RPM ran..
Add some custom style to your car by installing these custom door lock knobs. Features:Thread Size: 8-32BrandMr. GasketEmission Code5FinishChromeMaterialPlasticProduct TypeInteriorThread8-32Weight0.2000Part Number6885G..
Universal Aluminum T-Handle with B&M logo.Features:Brushed aluminum finishAll B&M automatic shiftersFits most aftermarket, SAE and metric shiftersFits most B&M shiftersAdditional ContentsPackages include thread inserts to fit 1/2-20, 3/8-24, 3/8-16, and 5/16-18 SAE threads and jam nutsBrandB&MCalifornia Proposition 65 Chemical NameChromium (hexavalent compounds)California Proposition 65 RequiredYe..
T-handle black plastic T-Handle packages include thread inserts to fit 1/2-20, 3/8-24, 3/8-16, and 5/16-18 SAE thread shifters. All B&M automatic shifters have 1/2-20 threads. Fits most B&M shifters and most aftermarket (SAE) shifters.Features:Black high strength plasticAll B&M automatic shiftersFits most aftermarket SAE shiftersFits most B&M shiftersAdditional ContentsPackages include thread inse..
This B&M Universal T-handle fits most B&M and aftermarket shifters. Kit includes thread inserts to fit 1/2-20, 3/8-24, 3/8-16 and 5/16-18 SAE.Features:SAE ThreadsAll B&M Automatic ShiftersFits Most Aftermarket SAE And Metric ShiftersFits Most B&M ShiftersAdditional ContentsIncludes thread inserts to fit 1/2 - 20, 3/8 - 24, 3/8 - 16 and 5/16 - 18 SAEBrandB&MCalifornia Proposition 65 Chemical NameCh..
This B&M Universal Button T-handle fits most B&M and aftermarket shifters. Kit includes thread inserts to fit 1/2-20, 3/8-24, 3/8-16 and 5/16-18 SAE. And a 12v momentary switch to activate Line-Lock, transbrake or nitrous.Features:Activate Nitrous SystemActivate Any Line Lock or TransbrakeFits Most Aftermarket SAE ShiftersFits Most B&M ShiftersAdditional ContentsPackages include thread inserts to..
This Universal T-Handle shift knob from BandM fit most BandM and aftermarket (SAE) shifters. They're available in plastic or aluminum, with or without a button for activating line lock, transbrake, or nitrous systems.Features:Activate Nitrous SystemActivate Any Line Lock or TransbrakeFits Most Aftermarket SAE ShiftersFits Most B&M ShiftersBrandB&MButtonYesCalifornia Proposition 65 Chemical NameChr..
Hammer Head T-Handle Chrome plated Hammer Head T-handle with SAE inserts (for most B&M shifters excluding manual shifters) includes SAE thread adapters that fit 1/2-20, 3/8-24, 3/8-16 and 5/16-18 threads.Features:Chrome plated aluminum finishErgonomically designed handleFits OEM shiftersFits most aftermarket shiftersAdditional ContentsIncludes SAE thread adapters that fit 1/2-20, 3/8-24, 3/8-16 an..
The output signal that is used to trigger magnetos differs from a conventional electronic ignition system. The Tach convertor is a compact device that converts the Pro-Mag's coil signal into a 12 volt square wave signal, so common tachometers designed for electronic ignitions can be used with the Pro-Mag. The convertor is less than three inches in length and its circuits are encased in epoxy for w..
Our universal Scavenger X-Pipe kits mount ahead of the mufflers in place of a traditional H-pipe and can provide significant torque improvement. Our patented Scavenger D-Port technology functions exceptionally well on modified GM, Ford, Mopar and muscle car applications while maintaining the classic Flowmaster sound.Features:Can produce significant torque improvementPatented D-Port technologyUnive..
Our universal Scavenger X-Pipe kits mount ahead of the mufflers in place of a traditional H-pipe and can provide significant torque improvement. Our patented Scavenger D-Port technology functions exceptionally well on modified GM, Ford, Mopar and muscle car applications while maintaining the classic Flowmaster sound.Features:Can produce significant torque improvementPatented D-Port technologyUnive..
Flowmaster's Universal X-Pipe is perfect for custom applications that require a compact crossover point in a dual exhaust system. These 409S stainless steel pieces have 2.25" slip-fit inlets and outlets and are backed by Flowmaster's Lifetime Limited Warranty. These Universal X-Pipes are a great way to maximize the performance in any dual exhaust system.Features:Premium QualityCompact DesignDyno T..
Hays hydraulic release bearings offer an easy method of setting up a hydraulic clutch release system in T-56 and TR6060 6-speed transmissions. Our kits are ideal for applications where a late model manual transmission is being integrated into an early vehicle not originally hydraulic equipped or as an upgrade to your factory hydraulic equipped vehicle. They feature full adjustability, providing an..
Hays Performance Drivetrain is proud to now offer Hydraulic Pedal Height Adjuster Kits. These black anodized pedal height adjusters plumb inline between your factory or aftermarket master cylinder and release bearing. By adjusting the screw on the top of the cylinder, fluid is initially diverted to the adjuster cylinder, and once the cylinder fills the remaining fluid travels directly to the hydra..
The MSD Coil Bracket offers easy, univerĀsal mounting for standard size ignition coils up to 2.25" in diameter.Features:Perfect for cannister type coilsBrandMSDEmission Code5Product TypeCoil BracketPart Number8213..
Racers have always been inventive and willing to fabriĀcate the parts they need if nothing is available. Building a crank trigger system is not an easy task but there has been an increasing number of unique front hub systems and distributorless ignitions that require one. MSD's Universal Flying Magnet Crank Trigger Kit will give you a head start in fabbing a custom kit for your application. This..
Let me help you spend some money :)