Your shopping cart
Your shopping cart is empty!
Search
- Search CriteriaSearch in product descriptions:Search in subcategories:
- Sort
Discount 10%
more_vert
05029NOS | SNEAKY PETE SYSTEMclose
NOS-05029NOS | The Sneeky Pete was designed as a true "Cheater Kit". This kit will enable you to obtain that extra tenth of a second without being obvious. It will be necessary to jet the carburetors a little richer (over and above what is normal, since you will have to compensate for the nitrous from the Sneeky Pete) while being "sneeky" since no additional fuel source is utilized. The kit com..
Discount 10%
more_vert
05130NOS | 4 & 6 CYLINDER UNIVERSALclose
NOS-05130NOS | "Wet" type kits are offered for most turbocharged and supercharged applications due to the increased air velocity and extra heat from the forced induction.Features:Multi-Fit Nitrous SystemExclusive NOS “Soft-Plume” Stainless steelFogger nozzle producing the finest and safest fuel/nitrous mixtureIncludes NOS 10 lb blue bottle w/ brackets & high flow bottle valveIndustry leading instr..
Discount 74%
more_vert
10012FLT | TERMINATOR WELDED REDUCERSclose
Terminator™ fully-welded reducers/street hookups are designed to be used behind three-bolt design collectors and help make any header installation complete.Features:Reducers bolt behind 3 bolt design collectors. Kit contains "one pair".Durable 16-Gauge ConstructionFully-Welded ConstructionBrandFlowtechEmission Code5Product TypeMiscellaneous ExhaustType of ComponentHeader ReducerPart Number10012FLT..
Discount 10%
more_vert
10016FLT | TERMINATOR WELDED REDUCERSclose
Terminator™ fully-welded reducers/street hookups are designed to be used behind three-bolt design collectors and help make any header installation complete.Features:Fully-Welded ConstructionDurable 16-Gauge ConstructionReducers bolt behind 3 bolt design collectors. Kit contains "one pair".BrandFlowtechEmission Code5Product TypeMiscellaneous ExhaustType of ComponentHeader ReducerPart Number10016FLT..
Discount 10%
more_vert
10511FLT | AFTERBURNER 3 HEADERclose
Afterburner Thrust Toobs used with open headers are designed to complete the system and squeeze out extra horsepower and torque. Designed to bolt behind any three-bolt header collector and are made from durable 16-gauge tubing. Features:3-Bolt, 3” Inlet x 12” LongPackage Contains One PairFully-welded constructionDurable 16 gauge constructionBrandFlowtechEmission Code5Product TypeMiscellaneous Exha..
Discount 10%
more_vert
1074 | Edel High Performance Zinc Additive to add wear protection to any motor oilclose
Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.Features:Black Oxide Coated Grade 8 SteelKit Contains 16 StudsEasy To InstallHeat Treated SteelBrandMr. GasketEmission Code5FinishBlack OxideMaterialSteelProduct TypeEngine FastenersWeight1.8500Part Number1074..
Discount 10%
more_vert
10984HKR | HDR BOLT 3/8-16X1close
Hooker now offers popular sized grade 5 black oxide 6 point header bolts.Features:Grade 5Black Oxide6 Point, 3/8 - 16 - 1"BrandHookerEmission Code5Product TypeMiscellaneous ExhaustType of ComponentHeader BoltPart Number10984HKR..
Discount 10%
more_vert
111131 | CONDENSERclose
ACCEL Motorcycle condensers cushion primary current to provide extended point life. Their high capacitance Mylar/foil construction eliminates internal shorting to provide long lasting power. Made in the U.S.A. BrandACCEL MotorcycleEmission Code5Product TypeMotorcycle Tune Up and ServiceWeight2.0600Part Number111131..
more_vert
$833.50More detailed
1115 | 1 pr. 49-53 FORD/MERC FLAT HEADSclose
EDE-1115 Edelbrock Ford flathead cylinder heads feature your choice of the original Edelbrock script logo or the block-style logo. Designed for both Fords and Mercurys, these heads are rugged, ribbed internally and externally, with a large water capacity, and excellent breathing characteristics. Available with 74 cc or 65 cc chamber volumes, the 65cc heads support an 8.0:1 compression ratio on blo..
Discount 10%
more_vert
112-560 | IAC BLOCK OFF PLATE FORD T/Bclose
IAC Block-Off Plate for Ford Throttle Bodies.Features:IAC Block-Off PlateFord Throttle BodiesBrandHolleyEmission Code5MaterialSteelProduct TypeIAC PartPart Number112-560..
more_vert
$833.50More detailed
1125 | 38-48 FORD/MERC FLAT HEADS 1prclose
EDE-1125 Edelbrock Ford flathead cylinder heads feature your choice of the original Edelbrock script logo or the block-style logo. Designed for both Fords and Mercurys, these heads are rugged, ribbed internally and externally, with a large water capacity, and excellent breathing characteristics. Available with 74 cc or 65 cc chamber volumes, the 65cc heads support an 8.0:1 compression ratio on blo..
Discount 60%
more_vert
11425HKR | KIT, COLLECTOR RINGclose
Hooker Collector Rings enable the header builder to adapt Hooker collector extensions or reducers to the basic collector. The kit includes two 3-bolt rings, matching gaskets and six bolts.Features:Collector Ring KitAdapts Hooker Collector Extensions Or Reducers To The Basic CollectorBrandHookerEmission Code5Flange Size2-1/2 inchProduct TypeMiscellaneous ExhaustType of ComponentCollector RingPart N..
Discount 10%
more_vert
11430HKR | KIT, COLLECTOR RINGclose
Hooker Collector Rings enable the header builder to adapt Hooker collector extensions or reducers to the basic collector. The kit includes two 3-bolt rings, matching gaskets and six bolts.Features:Collector Ring KitAdapts Hooker Collector Extensions Or Reducers To The Basic CollectorBrandHookerEmission Code5Flange Size3 inchProduct TypeMiscellaneous ExhaustType of ComponentCollector RingPart Numbe..
Discount 10%
more_vert
11435HKR | KIT, COLLECTOR RINGclose
Hooker Collector Rings enable the header builder to adapt Hooker collector extensions or reducers to the basic collector. The kit includes two 3-bolt rings, matching gaskets and six bolts.Features:Collector Ring KitAdapts Hooker Collector Extensions Or Reducers To The Basic CollectorBrandHookerEmission Code5Flange Size3-1/2 inchProduct TypeMiscellaneous ExhaustType of ComponentCollector RingPart N..
Discount 10%
more_vert
11511HKR | FORMED COLLECTOR (3 INTO 1)close
Hooker Formed Collectors incorporate unique long transition to provide better flow. Sold in pairs only. Manufactured From Mild SteelFeatures:Mild Steel MaterialFormed FitUnique Long Transition Provides Better Flow3 Into 1 Style CollectorBrandHookerCollector Diameter2-1/2 inchEmission Code5Primary Tube Dia.1-1/2 inchProduct TypeMiscellaneous ExhaustType of Component3 into 1 CollectorPart Number1151..
Discount 72%
more_vert
11515HKR | FORMED COLLECTORclose
Hooker Formed Collectors incorporate unique long transition to provide better flow. Sold in pairs only. Manufactured From Mild SteelFeatures:Mild Steel MaterialFormed FitUnique Long Transition Provides Better FlowBrandHookerCollector Diameter2-1/2 inchEmission Code5Primary Tube Dia.1-5/8 inchProduct TypeMiscellaneous ExhaustType of Component4 into 1 CollectorPart Number11515HKR..
Discount 10%
more_vert
11535FLT | FLOWTECH UP AND FORWARD TURBO HEADERS 40close
Flowtech Headers are the perfect combination of quality and value. These "4 to 1" LS Turbo headers available in 1-3/4" and 1-7/8" tube diameters are an ideal design creating a compact package allowing a variety of configurations (Up and Forward, Down and Forward, or Down and Back) to be used as a universal fit Turbo header. Features:CNC Mandrel-bent tubes provide consistent tubing diameters for sm..
Discount 10%
more_vert
11537FLT | FLOWTECH UP AND FORWARD TURBO HEADERS 40close
Flowtech Headers are the perfect combination of quality and value. These "4 to 1" LS Turbo headers available in 1-3/4" and 1-7/8" tube diameters are an ideal design creating a compact package allowing a variety of configurations (Up and Forward, Down and Forward, or Down and Back) to be used as a universal fit Turbo header. Features:CNC Mandrel-bent tubes provide consistent tubing diameters for sm..
Discount 10%
more_vert
11539FLT | FLOWTECH UP AND FORWARD TURBO HEADERS 30close
Flowtech Headers are the perfect combination of quality and value. These "4 to 1" LS Turbo headers available in 1-3/4" and 1-7/8" tube diameters are an ideal design creating a compact package allowing a variety of configurations (Up and Forward, Down and Forward, or Down and Back) to be used as a universal fit Turbo header. Features:CNC Mandrel-bent tubes provide consistent tubing diameters for sm..
Discount 10%
more_vert
11540FLT | FLOWTECH UP AND FORWARD TURBO HEADERS 30close
Flowtech Headers are the perfect combination of quality and value. These "4 to 1" LS Turbo headers available in 1-3/4" and 1-7/8" tube diameters are an ideal design creating a compact package allowing a variety of configurations (Up and Forward, Down and Forward, or Down and Back) to be used as a universal fit Turbo header. Features:CNC Mandrel-bent tubes provide consistent tubing diameters for sm..
Let me help you spend some money :)