Your shopping cart
Your shopping cart is empty!
Search
- Search CriteriaSearch in product descriptions:Search in subcategories:
- Sort
Discount 10%
more_vert
8777 | Retard Module Kit, 1,2,3,4,5 Degreesclose
MSD Retard Module Kits give you a full selection of retard modules to be used with your Timing Controls.BrandMSDEmission Code4Part Number8777..
Discount 10%
more_vert
8800 | Vibration Mounts, MSD-7 Seriesclose
In many performance applications such as off-road, drag race, marine and oval track racing, strong vibration forces can be transmitted through the chassis to the MSD unit. To protect the MSD from excessive vibration, we recommend the use of these vibration mounts. For use with MSD 7 series ignitions.Features:Fits MSD 7 series ignitionsBrandMSDEmission Code5Part Number8800..
Discount 10%
more_vert
8804 | Spark Guardclose
MSD's Spark Guard is a dielectric grease that solves many common ignition troubles. It stops voltage leaks, eases boot removal, prevents moisture buildup inside the spark plug wire boots, and even helps protect against radio noise (EMI). It also simplifies the installation of MSD Universal Spark Plug Wire Sets. Spark Guard will not dry up or harden so it will retain its spark isolating capabiliti..
Discount 10%
more_vert
8810 | Terminal Stripclose
The MSD Terminal Strip can be used for virtually any wiring installation to provide a clean, professional appearance. The Terminal Strip features four separate terminals that use 6-32 screws to hold 12 gauge or smaller wires. The terminals also accept wire lugs that are .312" wide and have a "wall" between each terminal to prevent arcing and electrical shorts. It is electrically rated at 300V-20..
Discount 10%
more_vert
8812 | Switch, Univ., Push Button, Alt. Actionclose
This switch is designed to be used as an auxiliary ignition On/Off button. It can be mounted to the steering wheel within easy reach of the driver and can be used in a Normally Open or Normally Closed position. BrandMSDEmission Code5Part Number8812..
Discount 10%
more_vert
8823 | Vibration Mounts, MSD 6 Seriesclose
In many performance applications such as off-road, drag race, marine and oval track racing, strong vibration forces can be transmitted through the chassis to the MSD unit. To protect the MSD from excessive vibration, we recommend the use of these vibration mounts. These vibration mounts fit the MSD 6 series ignitions. .75" x .63" - 4 each.Features:For use with MSD 6 series ignitionsBrandMSDEmissio..
Discount 10%
more_vert
8824 | Connector Kit, 2-Pinclose
MSD's Two Pin Connector Kit replaces damaged connectors or aids in custom wiring. Each kit comes with two connectors and four pins.BrandMSDEmission Code5Part Number8824..
Discount 10%
more_vert
8825 | Vibration Mounts, Pro Power Coilclose
In many performance applications such as off-road, drag race, marine and oval track racing, strong vibration forces can be transmitted through the chassis to the MSD unit. To protect the MSD from excessive vibration, we recommend the use of these vibration mounts. For use with Pro Power Coil, PN 8201Features:Fits Pro Power Coil, PN 8201BrandMSDEmission Code5Part Number8825..
Discount 10%
more_vert
8830MSD | Noise Capacitor, 26 Kufdclose
If you experience radio noise after installing the MSD Ignition, you may need to install an MSD Noise Filter. Electro Magnetic Interference (EMI) is occasionally generated from the MSD power cables and can be easily eliminated by installing the Noise Filter on the heavy power supply wires coming from the MSD. When the MSD draws current, it will draw through the Noise Filter instead of directly fro..
Discount 10%
more_vert
8839 | Vibration Mounts, Blaster SS Coilclose
In many performance applications such as off-road, drag race, marine and oval track racing, strong vibration forces can be transmitted through the chassis to the MSD unit. To protect the MSD from excessive vibration, we recommend the use of these vibration mounts. These fit the Blaster SS PN 8207 coil.Features:Fits Blaster SS coil PN 8207BrandMSDEmission Code5Part Number8839..
Discount 10%
more_vert
8842 | Plug Wire Spacer Kit,16/Set,Wire Sleevesclose
Not only do separators have to keep spark plug wires away from engine heat sources, they also have to keep the plug wires far enough apart to prevent inductive crossfire and actual spark loss. Features:No tools neededStand alone or can be bolted downFor use with wires with sleeveBrandMSDEmission Code5Part Number8842..
Discount 10%
more_vert
8843 | PRO-CLAMP WIRE SEPARATORSclose
Each Separator features secure grooves for each wire and a top bracket snaps in place to sandwich the wires in place. Each base has a hole for a retaining screw if desired and a tab that will help hold it in position.Features:No tools needed to openWires stay in place when cover is removedStand alone or can be bolted downBrandMSDEmission Code5Part Number8843..
Discount 10%
more_vert
Discount 10%
more_vert
Discount 10%
more_vert
Discount 10%
more_vert
Discount 10%
more_vert
8852 | Pro Race, High Temp Boots, 90 Deg.8/Cardclose
Using a proprietary blend of materials, the boots can handle much higher temperatures over an increased amount of time.Features:Designed exclusively for extreme duty racingProprietary rubber compound has a higher devulcanizing ratingComposition absorbs less infrared radiationBrandMSDEmission Code5Part Number8852..
Discount 10%
more_vert
Let me help you spend some money :)