Your shopping cart
Your shopping cart is empty!
Search
- Search CriteriaSearch in product descriptions:Search in subcategories:
- Sort
Discount 10%
more_vert
7542 | Shift Light, DSL, Adjustable Intensityclose
Best of all, it plugs directly into the PN 7531 ignition and lets you easily adjust the intensity of the light as drag day shifts into drag night.BrandMSDEmission Code5Part Number7542..
Discount 10%
more_vert
7551 | Launch Rev Limiter Switch Box,For 7530close
This handy controller lets you change the launch rpm setting instantly for last second changes in track conditions. They plug into the RS232 computer harness and have two rotary dials for adjustments.Features:Instantly changes the launch RPM setting of the Programmable ControlsTwo control dials, one for 1,000 RPM and another for 100 RPMAdjustable from 1,000-10,900 RPM in 100 RPM incrementsCan onl..
Discount 10%
more_vert
7555 | SPARK PICKUP ADAPTER FOR CAM SYNC, 7730close
This pick-up simply installs to the number one sparkplug wire and senses the trigger signal and sends this information to the Ignition through a fiber optic cable.Features:For cylinder per cylinder managementBrandMSDEmission Code5Part Number7555..
Discount 11%
more_vert
7740 | CAN-Bus Hub, 4-Conn, Power Gridclose
This hub allows you to expand the Power Grid system with up to four accessory modules.BrandMSDEmission Code5Product TypePower Grid ControllerPart Number7740..
Discount 11%
more_vert
77403 | BLK CAN-Bus Hub, 4-Conn, Power Gridclose
This hub allows you to expand the Power Grid system with up to four accessory modules.BrandMSDEmission Code5Product TypePower Grid ControllerPart Number77403..
Discount 10%
more_vert
7741 | CAN-Bus Termination Cap, Power Gridclose
Must be used with CAN-Bus Hub, PN 7740 to complete circuit. Without the CAN-Bus Terminator in place at the end of the CAN-Bus system, signals could be distorted. These distorted signals could result in permanent or intermittent problems that include but are not limited to; improper timing, false signals, and repetitious signals. Always be sure to have the MSD Controller and the CAN-Bus Terminator ..
Discount 10%
more_vert
7751 | Launch Controll Module, Power Gridclose
Change the launch rpm limit (2-Step) on the fly, no need to login into software.Features:Make last minute changesChange Shift Light and RPM LaunchBrandMSDEmission Code4Part Number7751..
Discount 10%
more_vert
7761 | ARC Module, Power Gridclose
Now there is even more control with the PN 7761 module for the Power Grid System Controller. This module sets rpm limits based on slew rate (rpm acceleration) or based on time since launch. All of this is programmed seamlessly in MSD View. The ARC module stands for Advanced RPM Control, it basically allows your race car to remain consistent, pass after pass, controlling your engines rpm curve du..
Discount 10%
more_vert
7762 | Boost Retard Module, Power Gridclose
This Power Grid module does exactly as its name sugests; retards the ignition timing in relation to boost, pressure. It also has an output wire that can be used to activate another device based on boost pressure, as well as an overboost shut-down feature that will shut the ignition off if boost exceeds the overboost target.BrandMSDEmission Code4Part Number7762..
Discount 10%
more_vert
77631 | Boost Control Module, Ext MAP, Pwr Gridclose
MSD Boost Controllers are the most accurate and easy to use controllers on the market. Both controllers plug directly into the Power Grid via the CAN bus which allows user to make adjustments through MSD View software. MSD Boost controllers feature two boost curves that can be toggled on the fly, a user adjustable boost vs. timing retard curve, pressure switch and an over boost shutdown to protect..
Discount 10%
more_vert
7764 | Power Grid Power Moduleclose
The MSD Power Module is a fully programmable, four stage solid state relay that can handle up to 20 Amps of current per channel. The Power Module eliminates the need for electromechanical relays, fuses and timers. Outputs can be controlled independently or simultaneously, giving great flexibility. It can be configured as a digital output (i.e. ON/OFF) or as a Pulse Width Modulated output (i.e. PW..
Discount 10%
more_vert
7765 | Wide Band O2 for Power Gridclose
Add valuable data logging capability to your Power Grid with the addition of the plug-n-play Wide Band O2 Module. Aside from providing O2 data to your Grid, the module also provides a 0-5v output to drive an air/fuel ratio gauge or provide a signal to other data loggers. Multiple modules and sensors can be connected to a single Power Grid setup if desired. The completely sealed unit uses a Bosc..
Discount 10%
more_vert
7782 | Harness, CAN-Bus Extension, 2ftclose
CAN-Bus Extension harness 2 Feet.BrandMSDEmission Code5Product TypePower GridPart Number7782..
Discount 10%
more_vert
7784 | Harness, CAN-Bus Extension, 4ftclose
CAN-Bus Extension harness 4 Feet.BrandMSDEmission Code5MakeUniversalProduct TypePower GridPart Number7784..
Discount 10%
more_vert
7786 | Harness, CAN-Bus Extension, 6ftclose
CAN-Bus Extension harness 6 Feet.BrandMSDEmission Code5MakeUniversalProduct TypePower GridPart Number7786..
Discount 10%
more_vert
7789 | Harness Adaptor, 7730 to Digital-7 Progclose
The Harness, PN 7789, allows a user to use their existing Programmable-7 Harness to install the Power Grid System with minimal changes. The harness is designed to be a direct plug-in for all existing wires, but will need two new wires run if the user desires the two new inputs of the Power Grid.BrandMSDEmission Code5Part Number7789..
Discount 10%
more_vert
8005 | Distributor Gear, Iron, AMC V8close
MSD has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. MSD engineers have built test fixtures and spent hundreds of hours testing and evaluating the metallurgy of our gears. The result is a special iron alloy gear that is treated to a low-friction coatin..
Discount 10%
more_vert
8007MSD | AMC Cam Gear, V8close
MSD has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. MSD engineers have built test fixtures and spent hundreds of hours testing and evaluating the metallurgy of our gears. The result is a special iron alloy gear that is treated to a low-friction coatin..
Discount 10%
more_vert
80641 | UNIV ALUM T-HANDLEclose
Universal Aluminum T-Handle with B&M logo.Features:Brushed aluminum finishAll B&M automatic shiftersFits most aftermarket, SAE and metric shiftersFits most B&M shiftersAdditional ContentsPackages include thread inserts to fit 1/2-20, 3/8-24, 3/8-16, and 5/16-18 SAE threads and jam nutsBrandB&MCalifornia Proposition 65 Chemical NameChromium (hexavalent compounds)California Proposition 65 RequiredYe..
Discount 10%
more_vert
80642 | UNIV BLK PLAST T-HANDLEclose
T-handle black plastic T-Handle packages include thread inserts to fit 1/2-20, 3/8-24, 3/8-16, and 5/16-18 SAE thread shifters. All B&M automatic shifters have 1/2-20 threads. Fits most B&M shifters and most aftermarket (SAE) shifters.Features:Black high strength plasticAll B&M automatic shiftersFits most aftermarket SAE shiftersFits most B&M shiftersAdditional ContentsPackages include thread inse..
Let me help you spend some money :)