Your shopping cart
Your shopping cart is empty!
EDE-1107 Edelbrock Ford flathead intake manifolds are designed to give your flathead engine more power. They are made of aluminum and feature a natural finish. The intakes are available for dual carburetor 1938-48 engines or in a single 4-barrel version for 1949-53 engines. Edelbrock - EDE-1107..
NOS-16035NOS | INTERCOOLER SPRAY BAR FEATURES: New snake design delivers 20% greater intercooler coverage area for improved cooling. Decreases intake air temperatures by 20º and allows you to safely run more boost for more power. Cut to length design for use with all intercoolers unlike competitive halo units. Kit includes 5LB NOS bottle & all necessary hardware for easy installationFeatures:Feat..
#6 A/N Fuel Inlet Hose Barb BrandQuick FuelEmission Code5MaterialSteelProduct TypeFittingPart Number19-600QFT..
Mr. Gasket Fuel Filters are precision machined to assure proper filtering in most common carburetor applications.Features:Billet Aluminum Fuel Filters w/ Serviceable Sintered Bronze Filter ElementMaterial: 6061-T6 AluminumFinish: Satin Anodized Black or Blue30 Micron Rating – Suitable for Use w/ CarburetorFilter Styles: -6 AN, -8 AN, 5/16” Hose Barb, or 3/8” Hose BarbClamshell Packaging – Ideal fo..
LAK-20470 | The Lakewood 20470 universal traction bar is designed to fit most vehicles equipped with leaf springs. These traction bars are 28 in long and feature a chrome plated finish. These traction bars reduce wheel hop and dramatically increase your traction by strengthening the rear suspension. The included rubber snubbers provide better ride quality. All brackets are MIG welded for stren..
LAK-20475 | Do you need to control your wheel hop? The Lakewood. universal traction bars are designed to strengthen your rear suspension and control that hop. These bars are made for vehicles with leaf springs mounted below the axle tube. The steel yellow powder coated bars are 28 in long. The kit is complete with rubber snubbers, U-bolts and installation hardware. They are made of heavy-gauge..
LAK-20535 | Replace those worn out bushings with these Lakewood rubber replacement ladder bar bushings. BrandLakewoodEmission Code5Product TypeSuspension ComponentsWeight0.3000Part Number20535..
LAK-20580 | Lakewood J-Bolt kits are for use with our competition series suspension bars. Kits include enough components for one bar. BrandLakewoodEmission Code5Product TypeSuspension ComponentsWeight3.0000Part Number20580..
LAK-22026 | Lakewood universal traction bars are designed to fit most leaf spring applications. These bars strengthen rear suspension and reduce wheel-hop. They are constructed of heavy gauge rectangular steel tubing and feature MIG welded brackets for extra strength. Rubber snubbers, U-bolts and installation hardware is included. BrandLakewoodEmission Code5Product TypeSuspension ComponentsWeigh..
The pressure inside the intake manifold is an extremely important input to the ECU. This sensor will respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from about 1 volt to 5 volts. Several different versions are available for normally-aspirated and engines with blowers. Applications up to 15 lbs. of boost.Features:Stock connector...
The pressure inside the intake manifold is an extremely important input to the ECU. This sensor will respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from about 1 volt to 5 volts. Several different versions are available for normally-aspirated and engines with blowers. Applications up to 15 lbs. of boost.Features:For use with MSD..
The pressure inside the intake manifold is an extremely important input to the ECU. This sensor will respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from about 1 volt to 5 volts. Several different versions are available for normally-aspirated and engines with blowers. Applications up to 30 lbs. of boost.BrandMSDEmission Code2Par..
The pressure inside the intake manifold is an extremely important input to the ECU. This sensor will respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from about 1 volt to 5 volts. Several different versions are available for normally-aspirated and engines with blowers. Applications up to 30 lbs. of boost.Features:Applications up ..
The vent tube spill reduction valve reduces spillage from your Holley carburetor's vent tubes in the event of a wreck or rough terrain experienced in off-road racing or rough water marine racing. This makes the spill reduction valves one of the most cost-effective safety items on the market today.Features:Reduces fuel spillage from vent tube in crash situationsReduce fuel slosh from vent tube d..
Atomic EFI Support ComponentBrandAtomicEmission Code5Product TypeFuel InjectionPart Number2935..
Atomic EFI Support ComponentBrandAtomicEmission Code5Product TypeFuel InjectionPart Number2936..
This lift plate is ideal for use on all GM LS Engines & bolts over the top of the valley cover (w/ intake manifold removed). This lift plate also fits Holley 2300 2-barrel & 4150/4160 4-barrel intake manifolds. Features (3) lift holes & can be mounted in several positions on the GM LS valley cover to adjust engine balance, when removing or installing the engine. Steel construction w/ red powder..
Using the right tool makes the difference between a good job and a great job; especially when crimping electrical connectors. Luckily, MSD offers Crimping Tools to compliment our quality electrical connector kits. Don't use a universal set of crimpers and hope for a good connection. Use the crimper designed for the type of terminal you're using and don't chance a bad crimp. We offer Weathert..
Properly hanging exhaust systems from the underside of a vehicle requires quality hangers. Hooker's new hanger rods are constructed from beautiful 304 stainless steel and are designed to work perfectly with Hooker's new 2-hole rubber insulators which reduce the transmission of exhaust vibrations. Hangers are sold in packages of two or 10Features:Hooker’s new hanger rods are constructed from beauti..
Properly hanging exhaust systems from the underside of a vehicle requires quality hangers. Hooker's new hanger rods are constructed from beautiful 304 stainless steel and are designed to work perfectly with Hooker's new 2-hole rubber insulators which reduce the transmission of exhaust vibrations. Hangers are sold in packages of two or 10Features:Hooker’s new hanger rods are constructed from beauti..
Let me help you spend some money :)