Your shopping cart
Your shopping cart is empty!
Search
- Search CriteriaSearch in product descriptions:Search in subcategories:
- Sort
Discount 10%
more_vert
56C | CARB GSKT 4 BBL SKIN PKGclose
This is a high quality gasket that is an excellent performer and works well with those Edelbrock Carburetors.Features:Made From Cellulose/Nitrile CompositionProvides Excellent Sealing And DurabilityCan Be Trimmed If Necessary1/16 In And 1/4 In Material AvailableBrandMr. GasketColorGreyEmission Code5MaterialPerformanceProduct TypeBase GasketWarrantyLimited 90 Day WarrantyWeight0.1300Part Number56C..
Discount 10%
more_vert
57C | CARB GSKT 4 BBL SKIN PKGclose
Carter Carburators - 4 bbl - 4 hole 1 7/16" bore - . Performance Skin Packaged. Made from durable 1/16" thick cellulose/nitrile composite gasket material. Precision die cut for an excellent seal and fit. Available bulk or skin packaged BrandMr. GasketEmission Code5Product TypeBase GasketWeight0.1300Part Number57C..
Discount 10%
more_vert
58C | CARB GSKT HOLLEY 4500 OPENclose
This carburetor base gasket is made from a durable heat-resistant nitrile rubber compound material and precision die cut for an excellent fit. Holley Carburetor: 4 bbl. - Open Center - 4500 Dominator. (Bulk Packaged, 1/16" Thick). BrandMr. GasketEmission Code5Product TypeBase GasketWeight0.0600Part Number58C..
Discount 10%
more_vert
5903-1HKR | HDR,MCTBC,COMP,BB CHRYclose
Hooker Competition headers offer the best value in the high performance header market. Designed for the value-conscious buyer who is running either a "stock" or "mildly-modified" engine, Hooker Competition headers offer premium features at a very competitive price. Made of durable 16 gauge mild steel tubing, the Hooker Competition header design utilizes a long transition collector to reduce back p..
Discount 10%
more_vert
6-515-2 | NEEDLE & SEAT,.130 STEELclose
"Steel-tipped" inlet needles are necessary when using exotic racing fuels. A .097" seat size should be used for small four barrel carburetors; a .110" seat size should be used for carburetors up to 735 CFM; larger seat sizes should be used with carburetors 750 CFM and larger. The following steel inlet needle and seat assemblies are available from Holley.Features:Compatable with alcohol or when us..
Discount 10%
more_vert
6-522 | FUEL INLET NEEDLE & SEAT ASSY .130 VITONclose
Inlet Needle Viton® Tip Adjustable 0.130" Seat Size. Viton® is a registered trademark of Dupont Performance Elastomers BrandHolleyEmission Code5Product TypeNeedle And Seat AssemblyPart Number6-522..
Discount 10%
more_vert
6130-1HKR | HDR, MCTBC,SC,FORD,FEclose
With Hooker Super Competition the objective has always been to make the maximum horsepower and to put it at the optimum point in the power curve. It takes a lot of time and money to do the job right. We will sometimes spend up to 2 to 3 times more just to make the Super Competition header work only 5 to 10% better. That commitment to excellence has made Hooker Headers the winningest header manufac..
Discount 10%
more_vert
6130010 | SPRING KIT - 11-19 CHALLENGERclose
The Hurst Stage One Spring Kit is an excellent choice for firming up the handling of your car and giving it that 'Just Right' stance. These springs will lower your vehicle approximately one inch, closing up that fender gap, lowering your center of gravity for improved handling and braking, and improving overall driving feel. Through careful design and rate tailoring, the Hurst Stage One Kit accomp..
Discount 10%
more_vert
6130012 | SPR KIT - STG 1 - 11-19 CHARGERclose
The Hurst High-Performance Spring Kit is an excellent choice for firming up the handling of your car and giving it that Just Right stance. These springs will lower your vehicle approximately 1-1/4 in., closing up that fender gap, lowering your center of gravity for improved handling and braking, and improving the overall driving feel. Through careful design and rate tailoring, the Hurst High-Perfo..
Discount 10%
more_vert
6130020 | SPR KIT - STG 1 - 11-14 MUSTANGclose
The Hurst Stage One Spring Kit is an excellent choice for firming up the handling of your car and giving it that 'Just Right' stance. These springs will lower your vehicle approximately one inch, closing up that fender gap, lowering your center of gravity for improved handling and braking, and improving overall driving feel. Through careful design and rate tailoring, the Hurst Stage One Kit accomp..
Discount 10%
more_vert
6130022 | 15-20 MUSTANG, LOWERING SPRING KITclose
The Hurst High-Performance Spring Kit is an excellent choice for firming up the handling of your car and giving it that Just Right stance. These springs will lower your vehicle approximately 1.0in, closing up that fender gap, lowering your center of gravity for improved handling and braking, and improving the overall driving feel. Through careful design and rate tailoring, the Hurst High-Performan..
Discount 10%
more_vert
6130HKR | HDR, FORD/MERCURYclose
With Hooker Super Competition the objective has always been to make the maximum horsepower and to put it at the optimum point in the power curve. It takes a lot of time and money to do the job right. We will sometimes spend up to 2 to 3 times more just to make the Super Competition header work only 5 to 10% better. That commitment to excellence has made Hooker Headers the winningest header manufac..
Discount 10%
more_vert
615130 | 11-14, MUSTANG, 5.0L, PERFORMANCE AIR INclose
Take the performance of your vehicle to the next level with the addition of Flowmaster's new Delta Force Performance Air Intake system for 2011-2014 Ford Mustang GT with 5.0L engine. The Delta Force system contains an ultra-trick looking, custom molded black Cross-Linked Polyethylene (XLPE) high-flow intake tube, black anodized aluminum fittings (when applicable), high quality reinforced silicone ..
Discount 10%
more_vert
63-1QFT | Quick Set Adj. Sec. Housingclose
Revolutionary design features a Billet aluminum cover with integrated adjustment screw. Simply turn the screw to change the rate of opening - no longer are you required to change the spring or take apart the housing. BrandQuick FuelColorShinyEmission Code5MaterialBillet AluminumProduct TypeVacuum Secondary HousingPart Number63-1QFT..
Discount 10%
more_vert
63-2QFT | Adj. Sec. Pump Cam Bracketclose
Adj. Sec. Pump Cam Bracket - Allows tuning of secondary idle air flow with a screwdriver and without removal of the carburetor. Nickel plated for protection and good looks, comes with retaining screw and instructions. BrandQuick FuelColorZincEmission Code5MaterialSteelProduct TypeAccelerator Pump Cam AssortmentPart Number63-2QFT..
Discount 10%
more_vert
7-20QFT | 6-32 Screw-in Restriction .020close
6-32 Screw-in Restriction .020" - Includes (4) restrictions BrandQuick FuelEmission Code5Product TypeEmulsion JetPart Number7-20QFT..
Discount 11%
more_vert
70130NG | WATER PUMP FORD WINDSOR IRON/NATclose
Mr. Gasket water pumps are built using all new components (not remanufactured) and meet or exceed OEM flow for extra cooling performance and durability. The cast housings are more attractive than OEM and come in a choice of custom finishes (black, chrome plated, or natural). Features:Made with premium all new components (Not remanufactured)More attractive housing than OEM (Cast iron & aluminum ..
Discount 10%
more_vert
70502308-RHKR | 2008-14 SRT CHALLENGER CAT BACK EXHAUSTclose
At the heart of any performance vehicle is the exhaust system. Hooker with its classic heart logo has been at the core of the exhaust industry for decades. Many of the most powerful vehicles on the planet have used Hooker Headers. Hooker continues to push the boundaries of performance with the new BlackHeart line of performance exhaust systems for popular late model vehicles. The BlackHeart line i..
Discount 62%
more_vert
71013005-RHKR | HEFI-CAN AUXILLIARY INPUTS HARNESSclose
Hooker BlackHeart now offers a harness to connect Holley EFI to the popular Attitude Adjuster exhaust valve controller. This harness allows the Attitude Adjuster to use the CAN bus from either Holley EFI OR Sniper ECU for TPS and RPM inputs through a simple plug and play connection. Features:Allows the Attitude exhaust valve controller to use the CAN bus from either Holley EFI or Sniper ECU for TP..
Discount 10%
more_vert
76C | COLL GSKT TR 2-1/2 X 3-1/2 BCclose
Manufactured from high-temperature composite exhaust material. Provides maximum torque retention to eliminate gasket failure. Can be trimmed if necessary for modified port applications. Precision die cut for an excellent fit. For OE replacement, high-performance street, drag race and oval track. Features:High-Temperature Exhaust MaterialWithstands Extreme Exhaust HeatProvides Excellent Sealing And..
Let me help you spend some money :)