Your shopping cart
Your shopping cart is empty!
Search - case
- Search CriteriaSearch in product descriptions:Search in subcategories:
- Sort
Discount 10%
more_vert
72288 | 3"IN(C)/2.5"OUT(D), 4x9x18, FLOW FXclose
The FlowFX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the "chambered" muffler sound. The interior features a large "straight-through" stainless steel perforated core, surrounded with high temperature sound absorption materials delivering a deep mellow tone. The internal flow design is reversible, so the muffler can be i..
Discount 10%
more_vert
78050G | HIGH ZINC ENGINE OIL ADDITITVE 4 OZclose
Modern motor oils have changed and no longer include the Zinc, ZDDP, and extreme pressure additives that are needed to protect the camshaft and lifters with flat tappet cams. The 4 oz. bottle treats 5-7 quarts of oil and prevents scuffing, galling & provides protection for the valve-train on your muscle car, hot rod, street rod, or classic car. Compatible with synthetic, petroleum, and blended ..
more_vert
$126.95More detailed
8101 | DUAL FEED FUEL LINE ADJUSTABLEclose
EDE-8101 Made from aircraft quality buna-N neoprene hose encased in braided stainless steel, these dual feed fuel line kits for Holley from Edelbrock are temperature, gas and oil resistant. The hose nipple is sold separately. Edelbrock - EDE-8101..
Discount 10%
more_vert
8132MSD | Universal Tach Convertor, Magnetosclose
The output signal that is used to trigger magnetos differs from a conventional electronic ignition system. The Tach convertor is a compact device that converts the Pro-Mag's coil signal into a 12 volt square wave signal, so common tachometers designed for electronic ignitions can be used with the Pro-Mag. The convertor is less than three inches in length and its circuits are encased in epoxy for w..
Discount 10%
more_vert
8142 | Coil,MSD Pro Mag 44 Amp,Replaces PN 8144close
The coil steps up the current to as much as 45,000 volts while sending over one amp across the plug gap. This high voltage is required to initialize the spark when it's up against nitro and extreme boost pressures. The Pro-Mag 44 Coil is hand assembled in-house and features over a pound of copper, carefully wound around a unique bobbin molded from DuPont® Rynite™. These windings and internals o..
Discount 10%
more_vert
814211 | 64-73 FORD MUSTANG SB HEADER 1-3/4close
Flowmaster's Scavenger Series Elite long tube headers are designed to replace the factory cast iron manifolds. These high quality headers are manufactured from stainless steel and are ceramic coated for maximum durability. They feature 1-3/4 in. primary tubes, 3/8 in. thick flanges and incorporate Flowmaster's popular 3 in. ball flange collector connections ensuring a leak free installation. Scave..
Discount 10%
more_vert
81423 | Coil, 44 ProMag, Blackclose
The coil steps up the current to as much as 45,000 volts while sending over one amp across the plug gap. This high voltage is required to initialize the spark when it's up against nitro and extreme boost pressures. The Pro-Mag 44 Coil is hand assembled in-house and features over a pound of copper, carefully wound around a unique bobbin molded from DuPont® Rynite™. These windings and internals of ..
Discount 10%
more_vert
8201 | Pro Power Coilclose
The special windings of the Pro Power Coil have extremely low resistance to produce the highest voltage possible with plenty of spark energy when used with an MSD 7 or 8 Series Ignition Control. The coil wire tower rises tall above the primary terminals and uses a spark plug style terminal for a firm connection to the coil wire. The housing is molded from a high dielectric polyester material and ..
Discount 10%
more_vert
8207 | Blaster SS Coilclose
Don't let the compact size of the Blaster SS Coil fool you, because it is packed with performance! The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output. In fact, when used with an MSD 6 Series Ignition, the Blaster SS produces 300 milliamps of current and a maximum voltage output of 40,000 volts! The secondary windings are wound on a..
Discount 10%
more_vert
82073 | Blaster SS, Black Coilclose
Don't let the compact size of the Blaster SS Coil fool you, because it is packed with performance! The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output. In fact, when used with an MSD 6 Series Ignition, the Blaster SS produces 300 milliamps with a maximum voltage output of 40,000 volts! The secondary windings are wound on a segmented..
Discount 10%
more_vert
8222 | Blaster Coil, High Vibrationclose
In applications such as off-road, marine or other harsh conditions, the MSD Blaster High Vibration Coil is the best choice. This protects the coil's internal components from high and low frequency vibrations that are commonly experienced in racing. If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster Coil li..
Discount 10%
more_vert
8251 | Pro Power HVC Coil, Use w/ MSD 7 Seriesclose
Coils have always had to compromise voltage output against current output. More voltage increases the initial ionization of the spark plug gap, but lowers the amount of current, or heat, that follows across the plug gap. When a coil is designed to produce more current, the voltage output generally suffers which taxes the ease of ionizing the gap. The MSD HVC Coils are designed to produce maximum v..
Discount 10%
more_vert
8252 | Blaster HVC, Works w/ MSD 6 Series Unitsclose
Coils have always had to compromise voltage output against current output. More voltage increases the initial ionization of the spark plug gap, but lowers the amount of current, or heat, that follows across the plug gap. When a coil is designed to produce more current, the voltage output generally suffers which taxes the ease of ionizing the gap. The MSD HVC Coils are designed to produce maximum v..
Discount 10%
more_vert
8253 | Ignition Coil, HVC-2, MSD 6 Seriesclose
The Blaster HVC coil utilizes an iron U-Core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from a special Dupont Rynite material and wound specifically to produce the most current possible with incredible voltage and lightning quick rise time. The blue housing is also molded from high dielectric Rynite material. The brass primary terminals are spaced far ..
Discount 10%
more_vert
8261 | Ignition Coil, HVC-2, 7 Series Ignitionsclose
The HVC II Coil is completely built in-house so our engineers have exclusive control over their performance and quality. The Coil utilizes an iron U-Core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from Dupont Rynite FR946 material which has incredible dielectric capabilities at high temperatures. MSD also incorporated a cutting edge winding material tha..
Discount 10%
more_vert
8276 | Pickup Assem., Non-Magnetic, 3/4"x16 UNFclose
MSD's Non-Magnetic Pick-Ups are engineered for extreme applications. In fact, this Pick-Up was designed and tested on 300+ mph top fuel dragsters! To live up to MSD's demanding expectations in these extreme applications, we took it upon ourselves to design and build the Pick-Ups in-house. This way we can control every aspect of their assembly and quality. Each Pick-Up is hand wound on a special ..
Discount 10%
more_vert
842446 | 2.25 IN(O)/OUT(C) SUPER 44 409Sclose
Flowmaster's Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we've ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.Features:Race proven patented Delta Flow technologyRecent two ..
Discount 10%
more_vert
842448 | 2.25 IN(O)/OUT(O) SUPER 44 409Sclose
Flowmaster's Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we've ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.Features:Race proven patented Delta Flow technologyRecent two ..
Discount 10%
more_vert
842546 | 2.5 IN(O)/OUT(C) SUPER 44 409Sclose
Flowmaster's Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we've ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.Features:Race proven patented Delta Flow technologyRecent two ..
Discount 10%
more_vert
842547 | 2.5 IN(C)/2.5 OUT(O) SUPER 44 409Sclose
The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we've ever built! Available in 409S Stainless Steel with a Lifetime Limited Warranty, these mufflers feature our advanced Delta Flow Technology design and are fully MIG-welded for maximum durability.Features:Premium Quality409S Stainless Steel ConstructionAggres..
Let me help you spend some money :)