Your shopping cart
Your shopping cart is empty!
Search - MSD
- Search CriteriaSearch in product descriptions:Search in subcategories:
- Sort
Discount 11%
more_vert
77403 | BLK CAN-Bus Hub, 4-Conn, Power Gridclose
This hub allows you to expand the Power Grid system with up to four accessory modules.BrandMSDEmission Code5Product TypePower Grid ControllerPart Number77403..
Discount 10%
more_vert
7741 | CAN-Bus Termination Cap, Power Gridclose
Must be used with CAN-Bus Hub, PN 7740 to complete circuit. Without the CAN-Bus Terminator in place at the end of the CAN-Bus system, signals could be distorted. These distorted signals could result in permanent or intermittent problems that include but are not limited to; improper timing, false signals, and repetitious signals. Always be sure to have the MSD Controller and the CAN-Bus Terminator ..
Discount 10%
more_vert
7751 | Launch Controll Module, Power Gridclose
Change the launch rpm limit (2-Step) on the fly, no need to login into software.Features:Make last minute changesChange Shift Light and RPM LaunchBrandMSDEmission Code4Part Number7751..
Discount 10%
more_vert
7761 | ARC Module, Power Gridclose
Now there is even more control with the PN 7761 module for the Power Grid System Controller. This module sets rpm limits based on slew rate (rpm acceleration) or based on time since launch. All of this is programmed seamlessly in MSD View. The ARC module stands for Advanced RPM Control, it basically allows your race car to remain consistent, pass after pass, controlling your engines rpm curve du..
Discount 10%
more_vert
7762 | Boost Retard Module, Power Gridclose
This Power Grid module does exactly as its name sugests; retards the ignition timing in relation to boost, pressure. It also has an output wire that can be used to activate another device based on boost pressure, as well as an overboost shut-down feature that will shut the ignition off if boost exceeds the overboost target.BrandMSDEmission Code4Part Number7762..
Discount 10%
more_vert
77631 | Boost Control Module, Ext MAP, Pwr Gridclose
MSD Boost Controllers are the most accurate and easy to use controllers on the market. Both controllers plug directly into the Power Grid via the CAN bus which allows user to make adjustments through MSD View software. MSD Boost controllers feature two boost curves that can be toggled on the fly, a user adjustable boost vs. timing retard curve, pressure switch and an over boost shutdown to protect..
Discount 10%
more_vert
7764 | Power Grid Power Moduleclose
The MSD Power Module is a fully programmable, four stage solid state relay that can handle up to 20 Amps of current per channel. The Power Module eliminates the need for electromechanical relays, fuses and timers. Outputs can be controlled independently or simultaneously, giving great flexibility. It can be configured as a digital output (i.e. ON/OFF) or as a Pulse Width Modulated output (i.e. PW..
Discount 10%
more_vert
77643 | Black, Power Grid Power Moduleclose
The MSD Power Module is a fully programmable, four stage solid state relay that can handle up to 20 Amps of current per channel. The Power Module eliminates the need for electromechanical relays, fuses and timers. Outputs can be controlled independently or simultaneously, giving great flexibility. It can be configured as a digital output (i.e. ON/OFF) or as a Pulse Width Modulated output (i.e. PW..
Discount 10%
more_vert
7765 | Wide Band O2 for Power Gridclose
Add valuable data logging capability to your Power Grid with the addition of the plug-n-play Wide Band O2 Module. Aside from providing O2 data to your Grid, the module also provides a 0-5v output to drive an air/fuel ratio gauge or provide a signal to other data loggers. Multiple modules and sensors can be connected to a single Power Grid setup if desired. The completely sealed unit uses a Bosc..
Discount 10%
more_vert
7782 | Harness, CAN-Bus Extension, 2ftclose
CAN-Bus Extension harness 2 Feet.BrandMSDEmission Code5Product TypePower GridPart Number7782..
Discount 10%
more_vert
7784 | Harness, CAN-Bus Extension, 4ftclose
CAN-Bus Extension harness 4 Feet.BrandMSDEmission Code5MakeUniversalProduct TypePower GridPart Number7784..
Discount 10%
more_vert
7786 | Harness, CAN-Bus Extension, 6ftclose
CAN-Bus Extension harness 6 Feet.BrandMSDEmission Code5MakeUniversalProduct TypePower GridPart Number7786..
Discount 10%
more_vert
7789 | Harness Adaptor, 7730 to Digital-7 Progclose
The Harness, PN 7789, allows a user to use their existing Programmable-7 Harness to install the Power Grid System with minimal changes. The harness is designed to be a direct plug-in for all existing wires, but will need two new wires run if the user desires the two new inputs of the Power Grid.BrandMSDEmission Code5Part Number7789..
Discount 10%
more_vert
7805 | MSD-8 Plusclose
There has always been a niche group of hardcore racers and pullers that run nothing but the MSD 8 Ignition Series. If you liked it then, you're going to like it even better now! The MSD 8-Plus Ignition produces the same extreme output of the original 8-Series, yet is now in a smaller housing with improved efficiency and internal components. One distinct change is now a built-in 2-Step Rev Control..
Discount 10%
more_vert
7904 | Blck, ProMag, 12LT, No Driveclose
Designed with Sprint cars in mind, the Pro-Mag 12LT is almost 30% lighter than the original Pro-Mag, but still produces the same incredible power. The compact housing sits an inch lower for improved clearance of the fuel injection, and it features a band clamp mount for easier timing adjustments. MSD has also designed a cap and rotor specifically for the 12LT series. The cap is injection molde..
Discount 10%
more_vert
7908 | Generator, 12 Amp, Pro Mag, Lightweightclose
Designed with Sprint cars in mind, the Pro-Mag 12LT is almost 30% lighter than the original Pro-Mag, but still produces the same incredible power. The compact housing sits an inch lower for improved clearance of the fuel injection, and it features a band clamp mount for easier timing adjustments. MSD has also designed a cap and rotor specifically for the 12LT series. The cap is injection molded f..
Discount 10%
more_vert
79081 | Generator 12 Amp Pro Mag Lite, Shortclose
Designed with Sprint cars in mind, the Pro-Mag 12LT is almost 30% lighter than the original Pro-Mag, but still produces the same incredible power. The compact housing sits an inch lower for improved clearance of the fuel injection, and it features a band clamp mount for easier timing adjustments. MSD has also designed a cap and rotor specifically for the 12LT series. The cap is injection molded f..
Discount 10%
more_vert
79082 | Generator 12 Amp Pro Mag LT Short, Blackclose
Designed with Sprint cars in mind, the Pro-Mag 12LT is almost 30% lighter than the original Pro-Mag, but still produces the same incredible power. The compact housing sits an inch lower for improved clearance of the fuel injection, and it features a band clamp mount for easier timing adjustments. MSD has also designed a cap and rotor specifically for the 12LT series. The cap is injection molded f..
Discount 10%
more_vert
79083 | Generator, 12 Amp, Pro Mag LT Blackclose
Designed with Sprint cars in mind, the Pro-Mag 12LT is almost 30% lighter than the original Pro-Mag, but still produces the same incredible power. The compact housing sits an inch lower for improved clearance of the fuel injection, and it features a band clamp mount for easier timing adjustments. MSD has also designed a cap and rotor specifically for the 12LT series. The cap is injection molded..
Discount 10%
more_vert
Let me help you spend some money :)