Your shopping cart
Your shopping cart is empty!
Search
- Search CriteriaSearch in product descriptions:Search in subcategories:
- Sort
Discount 10%
more_vert
7720 | Ignition, Power Gridclose
The Power Grid Ignition Control has been specially designed to mount to the Power Grid System Controller box, PN 7730/77303. This Ignition output only controller packs higher output than the current programmable units! For use with Power Grid Controller only, PN 7730 or PN 77303Features:For use with Power Grid PN 7730 or PN 77303 onlyHigh output spark for Power Grid SystemPower Grid PN 7730/7730..
Discount 11%
more_vert
7740 | CAN-Bus Hub, 4-Conn, Power Gridclose
This hub allows you to expand the Power Grid system with up to four accessory modules.BrandMSDEmission Code5Product TypePower Grid ControllerPart Number7740..
Discount 11%
more_vert
77403 | BLK CAN-Bus Hub, 4-Conn, Power Gridclose
This hub allows you to expand the Power Grid system with up to four accessory modules.BrandMSDEmission Code5Product TypePower Grid ControllerPart Number77403..
Discount 10%
more_vert
7741 | CAN-Bus Termination Cap, Power Gridclose
Must be used with CAN-Bus Hub, PN 7740 to complete circuit. Without the CAN-Bus Terminator in place at the end of the CAN-Bus system, signals could be distorted. These distorted signals could result in permanent or intermittent problems that include but are not limited to; improper timing, false signals, and repetitious signals. Always be sure to have the MSD Controller and the CAN-Bus Terminator ..
Discount 10%
more_vert
7751 | Launch Controll Module, Power Gridclose
Change the launch rpm limit (2-Step) on the fly, no need to login into software.Features:Make last minute changesChange Shift Light and RPM LaunchBrandMSDEmission Code4Part Number7751..
Discount 10%
more_vert
7761 | ARC Module, Power Gridclose
Now there is even more control with the PN 7761 module for the Power Grid System Controller. This module sets rpm limits based on slew rate (rpm acceleration) or based on time since launch. All of this is programmed seamlessly in MSD View. The ARC module stands for Advanced RPM Control, it basically allows your race car to remain consistent, pass after pass, controlling your engines rpm curve du..
Discount 10%
more_vert
7762 | Boost Retard Module, Power Gridclose
This Power Grid module does exactly as its name sugests; retards the ignition timing in relation to boost, pressure. It also has an output wire that can be used to activate another device based on boost pressure, as well as an overboost shut-down feature that will shut the ignition off if boost exceeds the overboost target.BrandMSDEmission Code4Part Number7762..
Discount 10%
more_vert
7764 | Power Grid Power Moduleclose
The MSD Power Module is a fully programmable, four stage solid state relay that can handle up to 20 Amps of current per channel. The Power Module eliminates the need for electromechanical relays, fuses and timers. Outputs can be controlled independently or simultaneously, giving great flexibility. It can be configured as a digital output (i.e. ON/OFF) or as a Pulse Width Modulated output (i.e. PW..
Discount 10%
more_vert
77643 | Black, Power Grid Power Moduleclose
The MSD Power Module is a fully programmable, four stage solid state relay that can handle up to 20 Amps of current per channel. The Power Module eliminates the need for electromechanical relays, fuses and timers. Outputs can be controlled independently or simultaneously, giving great flexibility. It can be configured as a digital output (i.e. ON/OFF) or as a Pulse Width Modulated output (i.e. PW..
Discount 10%
more_vert
7765 | Wide Band O2 for Power Gridclose
Add valuable data logging capability to your Power Grid with the addition of the plug-n-play Wide Band O2 Module. Aside from providing O2 data to your Grid, the module also provides a 0-5v output to drive an air/fuel ratio gauge or provide a signal to other data loggers. Multiple modules and sensors can be connected to a single Power Grid setup if desired. The completely sealed unit uses a Bosc..
Discount 10%
more_vert
8772 | Pro Mag A/Fuel Power Gridclose
The Pro Mag A/Fuel Power Grid Controller is designed for use with the MSD Pro Mag 44 in drag racing applications, which compete in the Top Alcohol Dragster category or sanctioning bodies that allow electronic ignition timing control when using a single or dual Pro Mag system. Although the Power Grid Controller has dual outputs it can be used with, a single Pro Mag or Dual Pro Mag that allows you ..
Discount 10%
more_vert
MSD-7780 | Harness Replacement 7730 Power Gridclose
Solid Harness.BrandMSDEmission Code5Part Number7780..
Let me help you spend some money :)