Ever wonder how you can install an aftermarket tachometer on a vehicle with no distributor and multiple coil packs? MSD has the answer with the Distributorless Tach Driver! The compact Tach Driver measures only 1.5" x 3.5" x 2" and is potted with a polyurethane compound for vibration and water protection so it can easily be mounted under the hood. It wires inline on the coils' 12 volt supply wire where it senses the current going through this wire and converts this information into a 12 volt output signal that most aftermarket tachometers use as a trigger signal. It can be used on 4, 6 or 8-cylinder engines.
Features:
Easily connect a tachometer to a coil-per-cylinder ignition.
Also can be used to drive other rpm controlled devices.
If you are triggering an MSD 6 or 7-Series Ignition with its white wire or points terminal, you will need the PN 8910 Tach Adapter. The PN 8910 will correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off the tach output terminal of the MSD Ignition Unit.Features:Designed for non-current limiting ignitionsBrandMSDEmission Code5Part Number..
Let me help you spend some money :)