MSD Boost Controllers are the most accurate and easy to use controllers on the market. Both controllers plug directly into the Power Grid via the CAN bus which allows user to make adjustments through MSD View software. MSD Boost controllers feature two boost curves that can be toggled on the fly, a user adjustable boost vs. timing retard curve, pressure switch and an over boost shutdown to protect the engine. The Power Grid data acquisition will record manifold and wastegate pressure as well as solenoid operation. The MSD Boost Controller, PN 7763 has two built-in 4-Bar (43.5 psi) sensors. High boost application will require, PN 77631 which uses a pair of external 6-Bar (75 psi) sensors.
Must be used with CAN-Bus Hub, PN 7740 to complete circuit. Without the CAN-Bus Terminator in place at the end of the CAN-Bus system, signals could be distorted. These distorted signals could result in permanent or intermittent problems that include but are not limited to; improper timing, false signals, and repetitious signals. Always be sure to have the MSD Controller and the CAN-Bus Terminator ..
Let me help you spend some money :)