Accessory

The Edge Accessory System (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories, daisy-chain style, to the CS and CTS platform. The ability to daisy-chain multiple accessories using the EAS allows users to monitor and display dozens of parameters on a single device. *EAS Starter Kits are only available to work with the CS and ..

The EAS Universal Sensor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS or CTS. This means you can add custom temperature, pressure, Air/Fuel and even Travel/Position gauges to your Edge CS and CTS! Using the Edge Accessory System provides the following benefits: Using the MyStyle software, sensors can be easily config..

Edge's EAS Pressure Sensor is a 0 - 100 PSIg 1/8 NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605). Edge's Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Use Edge's Pressure Sensor to monitor data su..

The EAS Temperature Sensor is a -40 to 300 1/8 NPT supplied with the connectors to plug directly into Edge's Universal Sensor Input System. Using Edge's Temperature Sensor you can monitor Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Use this in conjunction with the Universal Sensor Input and the C..

This is a tremendous new feature for truck owners! Customers can now hook up accessories like aftermarket lights, air compressors, etc. and engage them from the CTS. Install the new switch and use Edge's MyStyle software to name your accessory to display right on the screen and take advantage of Edge's clean EAS daisy chain link system to turn your truck's tools on/off.  The EAS Power Switch can c..

If your vehicle is not equipped with an outside temperature sensor then this is a must have! The EAS Ambient Temperature Sensor is a -40 to 230 Waterproof 0.2 diameter sensor ready to plug into Edge's Universal Sensor Input system. Now you'll never wonder what outside air temperature is again!..

The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. With the EAS system a user can connect multiple EGT sensors to monitor temperatures in different locations and compare readings to be even more precise. The Edge Accessory System (EAS) was created with future expandab..

The EAS 12 Volt Power Kit enables any Insight CS2 or CTS2 to work with vehicles that don't have an OBDII port! By connecting to a key-switch power and ground source, an Insight becomes a digital gauge display for anything that you want to monitor! With the separate purchase of the EAS system, you can monitor EGTs, pressure readings, temperature readings, and much more. Check out the EAS kits for ..

The EAS 12 Volt Power Kit enables any Insight CS2 or CTS2 to work with vehicles that don't have an OBDII port! By connecting to a key-switch power and ground source, an Insight becomes a digital gauge display for anything that you want to monitor! With the separate purchase of the EAS system, you can monitor EGTs, pressure readings, temperature readings, and much more. Check out the EAS kits for ..

The EAS 12 Volt Power Kit enables any Insight CS2 or CTS2 to work with vehicles that don't have an OBDII port! By connecting to a key-switch power and ground source, an Insight becomes a digital gauge display for anything that you want to monitor! With the separate purchase of the EAS system, you can monitor EGTs, pressure readings, temperature readings, and much more. Check out the EAS kits for ..

EAS EGT Kit (Daily Driver/Tow Kit)Includes the EAS Starter Cable and EGT Probe. ..

EGE-98621 | EAS REVOLVER TO INSIGHT SWITCH.Connects to the Insight CTS2 and the REVOLVER In-line chip to control the power levels of the REVOLVER through the Insight CTS2 monitor...

EGE-98900 | JUICE WITH ATTITUDE REPLACEMENT EGT PROBE (only for Juice w/ Attitude products)..

EAS REPLACEMENT 15" EGT LEAD (only for part number 98620)..