Your shopping cart
Your shopping cart is empty!
Search
- Search CriteriaSearch in product descriptions:Search in subcategories:
- Sort
Discount 10%
more_vert
7789 | Harness Adaptor, 7730 to Digital-7 Progclose
The Harness, PN 7789, allows a user to use their existing Programmable-7 Harness to install the Power Grid System with minimal changes. The harness is designed to be a direct plug-in for all existing wires, but will need two new wires run if the user desires the two new inputs of the Power Grid.BrandMSDEmission Code5Part Number7789..
Discount 10%
more_vert
8446 | Adapter Base,Cap-A-Dapt,PN 8445/PN 8420close
BrandMSDEmission Code5Qty1Part Number8446..
Discount 78%
more_vert
8886 | Adapter Cable for 6010 to OEM Sensorsclose
These harnesses allow you to easily connect the 6LS or 6LS-2 to a factory EFI system to take advantage of timing adjustments and settings!Features:Adapt the MSD Timing and RPM Controller (PN 6010) to an EFI system.Manage the ignition timing and program rpm limits.Connects to the factory crank trigger and other sensors.Programmable via a PC through MSD’s Pro-Data+ software.BrandMSDEmission Code5Par..
Discount 10%
more_vert
8910 | Tach Adapterclose
If you are triggering an MSD 6 or 7-Series Ignition with its white wire or points terminal, you will need the PN 8910 Tach Adapter. The PN 8910 will correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off the tach output terminal of the MSD Ignition Unit.Features:Designed for non-current limiting ignitionsBrandMSDEmission Code5Part Number..
Discount 10%
more_vert
8910EIS | Tach Adapter, Electronic Ignition Systemclose
If you are triggering an MSD 6 or 7-Series Ignition with its white wire or points terminal, you will need the PN 8910 Tach Adapter. The PN 8910 will correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off the tach output terminal of the MSD Ignition Unit.Features:Designed for current-limiting ignitionsBrandMSDEmission Code5Part Number8910..
Discount 10%
more_vert
8920 | Tach Adapter, Magnetic Triggerclose
If you are using the magnetic pickup input (green and violet wires) to trigger your MSD Ignition, you will need the PN 8920 Tach Adapter. The PN 8920 will correct the operation of most voltage-triggered tachometers that do not work directly off the tach output terminal of the MSD control. This Adapter should also be used on current-triggered tachs (hooked in series with the ignition switch).Featur..
Discount 25%
more_vert
RUS-640890 | Russell Adapter Ford EFI Fuel Pressure -4AN X 1/16" NPTclose
RUS-640890 Russell Performance precision-machined their EFI fuel pressure adapter fittings to help ensure precise thread engagement. These lightweight aluminum fittings are designed to match up with Russell Performance fuel line hose to provide a reliable, leak-free connection. Russell Performance - RUS-640890..
more_vert
$7.95More detailed
RUS-670000 | Russell -6 AN Fuel Flare Union Pressure Adapter w/ 1/8" NPT Port (Blue)close
RUS-670000 Russell AN flare unions and caps are the third and final step to connecting your hose assemblies. Manufactured from aerospace aluminum and available with either a protective blue anodized or new Endura finish, Russell adapter fittings use a 37 degree sealing angle that guarantees a positive seal at maximum operating pressures. They're available in a wide range of angles. Russell Perform..
more_vert
$7.95More detailed
RUS-670010 | Russell -8 AN Fuel Flare Union Pressure Adapter w/ 1/8" NPT Port (Blue)close
RUS-670010 Russell AN flare unions and caps are the third and final step to connecting your hose assemblies. Manufactured from aerospace aluminum and available with either a protective blue anodized or new Endura finish, Russell adapter fittings use a 37 degree sealing angle that guarantees a positive seal at maximum operating pressures. They're available in a wide range of angles. Russell Perform..
more_vert
$10.95More detailed
RUS-670080 | Russell -8 AN Flare to 3/8" NPT Pipe Pressure Adapter w/ 1/8" NPT Port (Blue)close
RUS-670080 Russell ProClassic pressure gauge adapters use aluminum alloys that meet or exceed minimum requirements for aerospace fittings. The fittings are precision-machined to exacting tolerances for trouble-free performance of pressure gauges with 1/8 in. NPT adapters. These fittings feature a black anodized finish to match your other ProClassic fittings and hose and protect them against corros..
more_vert
$16.95More detailed
RUS-670290 | Russell -4 AN Fuel Pressure Take off w/ 1/8" NPT side port (Red / Blue) close
RUS-670290 Russell AN flare unions and caps are the third and final step to connecting your hose assemblies. Manufactured from aerospace aluminum and available with either a protective blue anodized or new Endura finish, Russell adapter fittings use a 37 degree sealing angle that guarantees a positive seal at maximum operating pressures. They're available in a wide range of angles. Russell Perform..
more_vert
$12.95More detailed
RUS-670340 | Russell -6 AN Fuel Pressure Take off w/ 1/8" NPT side port (Red / Blue)close
RUS-670340 Russell Performance offers these fuel pressure take-off fittings that allow pressure to bleed off so you can check your fuel pressure. Made of top-quality materials, these fittings are anodized for a beautiful finish and long life. Russell Performance - RUS-670340..
more_vert
$17.95More detailed
RUS-670350 | Russell -8 AN Fuel Pressure Take off w/ 1/8" NPT side port (Red / Blue)close
RUS-670350 Russell Performance offers these fuel pressure take-off fittings that allow pressure to bleed off so you can check your fuel pressure. Made of top-quality materials, these fittings are anodized for a beautiful finish and long life. Russell Performance - RUS-670350..
Discount 10%
more_vert
Discount 10%
more_vert
Discount 10%
more_vert
Let me help you spend some money :)