Special Offers

Made from silicone to withstand extreme engine oil temperatures and injection molded for a precise fit. BrandMr. GasketEmission Code5EngineFord Small Block WindsorMaterialSiliconeProduct TypeRear Main SealRear Main Seal StyleOne PieceWeight0.1500Part Number30..

Designed for street/strip applications, the QFT 105 electric fuel pump will provide consistent performance and fuel control. This pump will flow more than enough fuel to support up to 350 HP engines. This pump draws four amps of current and is capable of producing 7 psi of maximum pressure. All mounting hardware and brackets are included. •105 GPH Flow Rate •Constructed of Lightweight Steel and A..

QFT's electric fuel pumps are perfect for combinations that are neither stock nor all out race cars. Available in 125-, 155-, and 175 GPH models, these pumps flow more than enough fuel to support between 400-750 hp. These pumps draw just four amps of current and are capable of producing 14 psi of maximum pressure (30-125-1, 30-155), and 18 psi of maximum pressure (30-175). All mounting hardware an..

QFT's electric fuel pumps are perfect for combinations that are neither stock nor all out race cars. Available in 125-, 155-, and 175 GPH models, these pumps flow more than enough fuel to support between 400-750 hp. These pumps draw just four amps of current and are capable of producing 14 psi of maximum pressure (30-125-1, 30-155), and 18 psi of maximum pressure (30-175). All mounting hardware an..

QFT's electric fuel pumps are perfect for combinations that are neither stock nor all out race cars. Available in 155-, and 175 GPH models, these pumps flow more than enough fuel to support between 400-750 hp. These pumps draw just four amps of current and are capable of producing 14 psi of maximum pressure ( 30-155), and 18 psi of maximum pressure (30-175). All mounting hardware and brackets are ..

Now you can know what your fuel pressure is at a glance with this easy to read 0–15 psi fuel pressure gauge.Features:Fuel Pressure At A GlanceEasy To Read0 To 15 PSIFuel Pressure GaugeBrandQuick FuelEmission Code5Product TypeGaugePart Number30-15QFT..

175 GPH Billet Electric Fuel Pump designed for drag racing. Features #8 AN fuel inlet and outlets, built-in fuel pressure gauge port, and internal/external adjustable bypass. Fuel pump can be used either way, simply use the provided plug to switch bypass modes. Mounting bracket, hardware, and detailed instructions are included. *Fuel pressure gauge and fitting are not included • 175 GPH electri..

Billet Regulator - Designed for use with a fuel pump that does not need to be bypassed. Black anodized top has a fitting for boost referenced applications and regulator body has port for fuel pressure gauge. Comes with laser cut stainless mounting bracket and hardware. #8 AN O-Ring fittings required. •Designed to operate within 4.5 - 9 PSI; Preset at 7 PSI •.250" (1/4") restriction •Compatible wi..

Billet Bypass Regulator W/JET - Designed for use with a mechanical fuel pump where fuel pressure is variable. By-Pass feature is restricted with a jet that can be adjusted to set your desired low-side fuel pressure. Blue anodized top has a fitting for boost referenced applications, comes with laser cut stainless mounting bracket and hardware. #8 AN O-Ring fittings required. •Designed to operate w..

Billet Bypass Regulator - Designed for use with an electric fuel pump where fuel pressure is steadily delivered. By-Pass feature is unrestricted and anodized top has a fitting for boost referenced applications. Comes with laser cut stainless mounting bracket and hardware. #8 AN O-Ring fittings required. •Designed to operate within 4.5 - 9 PSI; Preset at 7 PSI •.350" (7/20") restriction •Can be us..

Fits all QFT™ Electric fuel pumps and can be used with any 12, 16, and 24 Volt electrical system. Relay Kit includes 10 AWG wire to provide extra current capacity with minimal voltage loss, 30 Amp single pole relay, and quality crimp connectors.BrandQuick FuelEmission Code5Product TypeRelay KitPart Number30-199QFT..

Billet Regulator Manifold Cap - Used to block-off ports on our 30-2, 30-3, and 30-4 billet manifolds. Made of light weight aluminum and O-Ring sealed for leak-free performance. Hardware included, sold individually. • Regulator log cap • Seals off unused regulator ports • Made of lightweight aluminum and O-ring sealed for leak-free performanceBrandQuick FuelColorRedEmission Code5MaterialAluminum..

Extreme performance and extreme durability. That's what Pro Series billet fuel pumps are all about. Built for the most demanding drag racing applications, Pro Series pumps feature hard anodized billet aluminum housings, a rugged six-vane pump, all armatures are epoxy coated to secure windings and extend motor life. The pump base is integrated as bottom end cap of motor promoting better pump sealin..

Extreme performance and extreme durability. That's what Pro Series billet fuel pumps are all about. Built for the most demanding drag racing applications, Pro Series pumps feature hard anodized billet aluminum housings, a rugged six-vane pump, all armatures are epoxy coated to secure windings and extend motor life. The pump base is integrated as bottom end cap of motor promoting better pump sealin..

Billet 4-port regulator for non-return style applications. •#8 AN O-ring inlet and (4) outlet ports. •Provisions for boost reference and fuel pressure gauge. •Compatible for use with gas, alcohol and E85 fuels. •Can be used with QFT™ billet fuel pressure regulator logs. •Includes mounting bracket. BrandQuick FuelEmission Code5Product TypeRegulatorPart Number30-4803QFT..

0-30 PSI non-liquid filled fuel pressure gauge with anti-fluctuation mechanism. Provides consistent, smooth readings from 0-30 PSI. 1/8" NPT threaded. •Designed for use with QFT™ billet fuel pressure regulators (30-1803, 30-1899, 30-1900 & 30-4803)BrandQuick FuelEmission Code5Product TypeGaugePart Number30-48QFT..

Billet Regulator Manifold 4 Port - Machined & anodized manifold features provision for (4) regulators. Can be configured for one, two, or three regulators with the use of 30-1 block-off(s). Comes with stainless steel laser-cut mounting bracket and hardware. #8 AN O-Ring inlet at both ends. • Billet regulator log designed to mount (4) fuel pressure regulators • #8 AN O-ring inlet ports • Designed ..

4-Port Regulator designed to provide smooth, consistent and repeatable performance. This regulator is machined from aircraft grade billet aluminum and anodized for added durability and reliable performance. •Hard-coat anodized billet housing. •Supports engines over 650 HP. •#8 AN inlet and 4 x #8 AN outlet ports. •Adjustable from 5-8 PSI. •Fluorocarbon diaphragms and Viton® O-rings. •Stainless st..

2-Port Regulator designed to provide smooth, consistent and repeatable performance. This regulator is machined from aircraft garde billet aluminum and anodized for added durability and reliable performance. •Hard-coat anodized billet housing. •Supports engines up to 650 HP. •#10 AN inlet and #8 AN outlet ports. •Adjustable from 5-8 PSI. •Fluorocarbon diaphragms and Viton® O-rings. •Stainless stee..

New QFT™ fuel filter assemblies are available in both canister and in-line styles. With threaded end caps, they are easily serviced and are available in different filter media. • In-Line style filter assembly • Supports 2500+ HP engines • Provides substantial filtering area • Hard-coat anodized billet end caps for superior strength and corrosion resistance • End caps equipped with Viton® O-rings ..